Cricut machines are available at Diamonds Crafts store!
Here’s what you’ll need for this DIY:
Wine glass(es) (available at Glasses by Bottles Curacao)
Cricut Machine (available at Diamonds Crafts Curacao)
Cricut essential tools
Cutting mat
Adhesive foil or vinyl, in the color of your choice. I used matte gold adhesive foil.
Transfer paper
Step 1: wash your wine glass(es) so that the surface is completely clean. Next, roll out your material onto the cutting mat and fire up Design Space and load the project cut file.
Step 2: following the prompts on your screen/in Design Space, load your machine and start cutting. Once the designs are cut, it’s time to start removing the excess material from the sheet, so that you’re left only with your design.
Step 3: it’s time to transfer your design! Cut out a piece of transfer paper that is roughly the same size, or slightly larger, than your design. Remove the protective film from the transfer paper and then place the sticky side face down on-top of your design on the mat. Use the scraper tool to smooth out air bubbles and to transfer your design to the transfer paper. Carefully remove the transfer paper and your design from the mat by pealing back the edges.
Step 4: grab your wine glass and carefully place your design on it. Press down firmly to ensure it sticks and remove any air bubbles. Carefully peel back the transfer paper.
The last step is the best, pour yourself a glass of wine and put your brand new, personalized wine glass(es) to good use.
Cheers!
コメント